
New Castrol CRB Turbomax 15W-40 CI-4 is an advanced heavy duty diesel engine oil. It is suitable for use in high speed 4-stroke diesel engines that use a broad range of fuel qualities. It is also compatible with diesel engines fitted with exhaust gas recirculation (EGR) systems
Trucks work hard in tough conditions and irrespective of the truck you own, new or old, the engine in your truck is always under threat. There is a destructive cycle in the engine that can damage critical parts. Heat, deposits, and wear; 3 threats linked together, an increase in one can increase all and over time could lead to severe engine damage.
Increased heat in the engine can cause oil to break down and result in an increase of oil thickening and deposit formation; this accumulation of deposits in the oil or on metal surfaces can lead to abrasive or corrosive wear in engine. This abrasive wear increases friction and heat within the engine and the destructive cycle is formed.
New Castrol CRB Turbomax 15W-40 CI-4 with Durashield Technology helps break the destructive cycle of heat, deposits and wear - giving your engine 3X protection* for long and healthy engine life
*3X refers to protection against 3 elements – heat, wear and deposits
- API CI-4
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
Physico-Chemical properties
Name | Method | Units | CRB Turbomax 15W-40 CI-4 |
Density 15C | ASTM D4052 | g/ml | 0.874 |
Viscosity, Kinematic 100C | ASTM D445 | mm²/s | 14.5 |
Viscosity, Kinematic 40C | ASTM D445 | mm²/s | 110 |
Viscosity Index | ASTM D2270 | None | 134 |
Viscosity, CCS-20C (15W) | ASTM D5293 | mPa.s (cP) | 5800 |
Ash, Sulphated | ASTM D674 | % wt | 1.1 |
Total Base Number, TBN | ASTM D2896 | mg KOH/g | 8.1 |
Pour Point | ASTM D97 | °C | -39 |
Flash Point, PMCC | ASTM D93 | °C | 210 |